Evaporative Cooling Humidifier

Home Humidifiers 50Hz SKV

SKV - EVAPORATIVE COOLING HUMIDIFIER

Overview

Custom modular design to fit any application
Specifically configured SKV Controller
Four evaporation factors: 65%, 75%, 85% and 95%
Inorganic and inflammable material (UL900 Class 1)
Unique design resulting in low pressure drop

Hygienic & Safe

Inorganic and inflammable material (UL900 Class 1)
Use tap or RO water
Water treated with 5μm pre-filter and silver ions
UV sterilizer on water line (optional)

Easy Maintenance

Designed to simplify maintenance
5 easy steps

SKV Controller

Pre-configured for each humidifier
Easy connection with only one 6-wire control cable
Controls up to 4 evaporative modules
BACnet communication (optional)

Overview
Operation & Features
Hygienic
Media & Water Quality
Easy Maintenance
5 Simple Steps
SKV Controller
SKV Electronic
Controller

Tech Time

Instructions
SKV Evaporative Cooling

English
SKV - Ease of Maintenance

SKV - Overview

Overview

In an evaporative humidifier, water is supplied to the top of the evaporative module and flows down the wet media (like a waterfall). Warm dry air passes through the wet media, evaporates water and thus raises the humidity level. The SKV also offers up to 12°C (21.5°F) of cooling as a result of the transfer of energy when the water evaporates.

Warm Cool Recirculation
pump Tank Electrical Box Reversible and easy
to remove pump skid Drain pump Up to 5 stages Water Inlet Drain P Trap Water distribution drawers Minimal need of blanking plates (optional) Media panel (4 evaporation factors) Droplet separator SKV controller 1 cable (6 wires) Silver ion anti-bacterial cartridge 5µm prefilter

Features

Custom designed with Humidisoft to meet your specific duct/application dimensions
Energy transfer while water evaporates results in free cooling up to 12°C (21.5°F)
Low energy (< 1 kW) consumption ensuring an environment friendly application
Available with 4 evaporation factors
Minimum blanking plates resulting in lower pressure drop
Silver Ion cartridge to prevent microbial growth
Staging valves up to 5 for flexible and accurate control
Includes SKV electronic controller
- Microprocessor based, field configurable controller
- On/Off or modulating control type
- Master/slave configuration for up to 4 evaporative modules
- Easy connection with only one 6-wire control cable
- BACnet communication (optional)

BACnet Communication (optional)

MS/TP @ 9600, 19200, 38400, or 76800 bps
Set MAC address via controller menu
Manual or automatic device instance configuration
Automatic Baud Rate Detection

Operation

This configuration consists of an evaporative module that is installed in an air handling unit or duct.

Water enters the evaporation module from the main water supply and reaches the top of the unit.
The water distribution system disperses water over the evaporative module continuously like a waterfall.
Warm dry air passes through the wet media, evaporates water, and raises the humidity level.
Recirculation pump collects and recirculates the un-evaporated water to the matrix again and the evaporation process continues.

Application

The SKV Evaporative Cooling humidifier is ideal for applications requiring low energy and water consumption such as:

Data Centers
Paint Shops
Amphitheaters
Greenhouses
Commercial Buildings

Nomenclature

SKV	R	95	C	1	D	C
	TypeR = Recirculation D = Direct Feed O = OEM	Evaporation Factor65 = 65% 75 = 75% 85 = 85% 95 = 95%	ControllerC = Standard Controller B = BACnet Controller	No. of Stages1 = 1 Stage 2 = 2 Stages 3 = 3 Stages 4 = 4 Stages 5 = 5 Stages	DropletD = Droplet separator included _ = None	VoltageA = 120Vac C = 230Vac

Media Panels

The SKV Evaporative corrugated media is made of fiberglass material bounded with a special inorganic compound, which allows exceptional moisture absorption, ensuring continuous humidification and evaporative cooling even at a high air velocity. The inorganic compound makes it hygienic, fire resistant and incombustible.

Inorganic and inflammable material (UL900 Class 1)
Hygienic and safe
Low pressure drop
Trouble free maintenance
No water treatment required
No risk of over saturation
Four evaporation factors: 65%, 75%, 85% and 95%
Media frame made of stainless steel
Media easily removable from stainless steel frame

4 evaporation
factors Droplet
separator Warm dry air Cool humid air
(up to 12°C) Low pressure
drop 65% 75% 85% 95%

Water Quality

Hygienic operation with tap or RO water supply.

Self-cleaning, odor free media
Water treated with 5μm pre-filter
Anti-bacterial silver ion dosing cartridges prevent microbial growth
UV sterilizer on water line (optional)

How Silver Ions Work

They inhibit the reproduction of microbe by:

Silver ions break through the cell wall
Silver ions disrupting respiration of the microbe
Silver ions attaching to DNA of the microbe to stop cell replication

1 2 3 5µm
Pre-filter Silver ions

5 Easy Steps

The SKV has been designed for easy access to components of the evaporative module for maintenance.

Pull out the easy access water distribution drawers
Remove the pushing quick connect hose
Remove the easy access pump skid (only 1 screw)
Remove holding channel
Remove SKV media panel

Pull out the easy access water distribution drawers
Remove the pushing quick connect hose
Remove the easy access pump skid (only 1 screw)
Remove holding channel
Remove SKV media panel

Features

Microprocessor based, field configurable controller
Master/slave configuration for up to 4 evaporative modules
On/Off or modulating control type
Real-time clock with flexible scheduler
Simple viewing and exporting of trending log and alarm log
In-field firmware upgradeable via SD card
Easy connection with only one 6-wire control cable
Stainless steel IP56 rated (equivalent to NEMA type 4) enclosure for outdoor installations
User-friendly menu driven 128 x 64 LCD

BACnet Communication (optional)

MS/TP @ 9600, 19200, 38400, or 76800 bps
Set MAC address via controller menu
Manual or automatic device instance configuration
Automatic Baud Rate Detection